Service Hotline:+86(0)532 8587 1802
Introduce
Z46210 full hydraulic tunnel drilling machine performance parameter (plunger pump structure):
主轴转速(r/min) |
0-2500 |
液压系统工作压力MPa |
20 |
主轴扭矩(Nm) |
>300 |
最大工作压力MPa |
25 |
轴向推力 kN |
>40 |
钻孔方位角 |
0°~360° |
轴向拉力 kN |
>30 |
井下钻孔倾角 |
0°~360° |
动力头行程mm |
1600 |
地表钻孔倾角 |
0°~180° |
电机功率kw |
37 |
电机转速rpm |
1480 |
电压V |
380 |
频率Hz |
50 |
主泵最大压力MPa |
31.5 |
辅泵最大压力MPa |
31.5 |
钻机部件外型尺寸 |
主机体:2370×300×500 动力车:1530×1100×1210 |
||
(长*宽*高)mm |
操纵台:550×450×1150 |
||
钻机部件重量 |
总重量:1300 kg(主机体:350kg 动力车:580kg 操作台:112kg) |
Note:
The above drill data are for reference only. If there is any change, you will not be informed in advance. For further technical advice, please contact our sales & technical department.
The relationship between drill depth and borehole diameter and drill pipe material:
Z46210 type
钻孔深度m |
钻孔直径mm |
钻杆直径mm |
钻杆材料 |
300 |
36 |
33 |
钢 Steel |
400 |
46 (AQ) |
43 |
铝 Aluminum |
250 |
46 (AQ) |
42 |
钢 Steel |
Note:
The above table data are data for drilling vertically in homogeneous strata, for reference only.
Sweep a sweep of WeChat
Technical support::hundreds of millions of people technology